Thanks for the reply. We got the machine running today and it works beautifully! What used to take us many hours -- now is done in a few minutes. The machine is very nice and I’m very happy with our investment.
Thanks again for your help,
—— Paul W. Mott
Yes, thank you. The heat shrink cutter is working well.
I've CCd Roger Haynes. He will be researching the lead cutter. Please communicate with him directly on the lead cutter.
—— Lenny Baledge
Hope all has been well. Got the wire stripping unit up and running, it works great! I had a couple quick questions about it, Firstly: Can you tell me what the "blade retract value" does?
I was also wondering what the difference between "long wire", and "short wire" is.
Thank you for the time,
—— Ronny Carbone
I'm Online Chat Now
High speed multi-core cable cutting different length and stripping machine
Copper wire peeling length: 5-15mm (no insulation can be left below 5mm)
Power supply: AC220V50HZ
Air pressure: 5-7KG
Applicable core area: 0.5-3.0 square
Cut length size: each line can be individually adjusted 20-290MM
1. The length of the copper wire below 5 mm cannot leave rubber
2. Because the length needs to be cut, the length of the rubber left on the machine is different from that of the ordinary peeling machine. The length of the remaining rubber is equal to the length of the peel minus the length of the half-peel. For example, if the length of the peel is 6 mm, it needs to be half-peeled 3 mm to pull the rubber. The length of the remaining rubber is 6-3 mm = 3 mm
3. The minimum drop of every two lines must be greater than, (minimum equal to) the length of the copper wire that needs to be stripped, for example, leave 20MM for one line and 25MM for the other line, then leave 20MM for this line to strip the copper wire. more than 5mm