Programmable PCB depaneling machine can separate irregular pcbs, such as rat bit pcbs. There is no better way to depanel a printed circuit board than with the PCB Router. This PCB depaneler router is the answer for hassle-free PCB depaneling through the employment of a router bit that minimizes stress on components.With a built-in fixture based dust vacuum system, the system is sure to be clean and efficient. This prevents warping, and takes full advantage of vacuum strength for the most effectual dust collection.
This pcb router is for the depanel of all kinds of irregular PCB and stamp hole PCB, supporting the program of dots, lines, arcs, L, circles and other paths. It can avoid cracks and component damages by artificial fold.
Model | YS-FB6331 |
Power | 220V/110V |
Working area | 600*300*100mm |
Voltage | 600W |
Size(L*W*H) | 582*978*697mm |
Weight | 100KG |
Driving Motor | Stepper Motor |
Principal Axis | Domestic |
Running Speed | 500 mm/s |
Cutting Speed | Max 100 mm/s, depends on the material of the board and cutting effects |
Repeated Accuracy of Driving System | +/- 0.02 mm |
Resolution | / - 0.01 mm |
Configuration | X, Y and Z axis, 600*300*100 mm, can be customized |
Repeated Accuracy | <0.1mm, for the profile of straight line and curve. |
Circuit Board Positioning | Special or Standard fixture |
Loading and Unloading Method: | Artificial way |
Circuit Board Thickness | 0.4mm-4mm |
Security Settings | Machine Emergency Stop, Principle Emergency Stop, Detection of Overheating and Overload of the Principle Axis Motor. |
Milling cutter parameters
Specifications: 0.8/1.0/1.2/1.5
Service life: 35--40m
Spindle parameters:
Power: 300W
Maximum speed: 60000 rpm
Cooling method: air cooling
Service life: 5-6 years
Industrial vacuum cleaner parameters
Brand: Tenao
Vacuum suction: 1800mmH2O
Cooling Mode: Cycling
Capacity: 15 liters
Power: 1000W single phase, 220V
Air flow: 48kg/s
Working time: 2-4 hours
Packing size: 440*440*620
Weight: 13.7kg
1,Table type pcb cutting machine, speed to 100mm/s,fixed position speed 500mm/s.
2,Cut continuously during loading and unload.
3,High speed rotating shaft system makes it move fast and reduce time. Increase production and keep high accuracy.
4,High quality hardware guarrantee high-performance.
5,All of the lead screws are covered, which can prevent dust, and gurrantee life and performance.
Picture of Double-Station Stamp Hole PCB Milling Cutter For Mouse Bite PCB Depaneling Separating
Contact Us at Any Time