Payment & Shipping Terms:
|Name:||Automatic Components Pin Pcb Lead Cutter Foot Cutting Machine||Function:||Trim Extra Legs For Pcb|
|Weight:||157KG Packed By Wooden Case||Packing Size:||77x96x107CM|
component lead cutting machine,
pcb lead cutter
RS-911A is an automatic type PCB extra pins/legs cutting trimming machine. It can automatically input and output the PCBs, and trimming
extra PCB lead after the welding. And cut length is adjustable, and shortest length to 1.5mm. The pcb trimming lead blade has 200mm and 250mm diameter. It can trim the extra pcb legs without damaging pcbs.
To use the automatic PCB lead cutting machine, pcb should meet below requirement.
1. The pcb size should be within 400x250MM.
2. The PCB board side should have at least 2MM distance from components.
3. The shortest length machine can cut is up to 1.5MM. However if there is components on back side, lead length should be higher than components. For example, there is 3MM height components on bottom side, so after cutting, the lead length should be higher than 3MM. You can not cut lead length lower than 3.0MM.
|Name||With the prevent bending device, to overcome the bending PCB in welding|
|Power Supply||380V AC50HZ/60HZ|
|Shortest cut length||1.5MM Cut length is adjustable|
|Available PCB size||Max 400x250MM|
|Blade type||200MM Dia, And 250MM Dia for option|
1, Automatic input and output the PCB, cutting the PCB lead after the welding.
2, High stability, it can connect with the automatic soldering machine or AI machine.
3, Applies to the finger type slid to fasten the PCB board.
4, Finger slid change easy and economic.
5, With the prevent bending device, to overcome the bending PCB in welding.
6, Input speed can be adjusted, max. speed is 3m/min.
Welcome to contact us for more information about Automatic components pin pcb lead cutter foot cutting machine
Contact Person: Ms. Sally Way