Screw Automatic Feeding And Tightening Machine For M2 to M6 Screws

Intro:

Screw Automatic Feeding And Tightening Machine RS-L680 works for M2 to M6 screws with head. With automatic feeding system, operator just need to hold the screwdriver, screws will be fed automatically to screwdriver for locking.  Operator does not need to hand fetch screws, thus won't cause secondary pollution to screws out of stain or hand sweat. Screws not easy to rust.

Suitable:

To make sure the machine can work well, the screw should meet below requirements.

• 1. Screws should be M2 to M6. Note: One machine only works for 1 size screws.
• 2. Screw length should be 1.3 times of screw head diameter. To make sure good feeding.
• 3. Should header diameter should be better within 3.5-11MM. Screw head diameter can allow max up to 20mm

Specification:

Features:

Automatic screwdriver machine subvert the working principle of traditional screwdriver machine by abandoning the vibration plate and pusher. It carries forward the advantages and overcomes the disadvantages of traditional screwdriver machine, making it portable, safe, stable and fast with low noise and low energy consumption.

1. The screwdriver is small and will not block workers’ sight.

2. The screwdriver is very light in weight and do not give a sense of heaviness.

3. The noise is below 65db.

4. The screw will not vibrate and fade for not using the vibration plate

5. Total weight is about 9kg, easy to carry.

6. With intelligent alarm function (acousto-optic remind) for component shortage.

Picture of Screw Automatic Feeding And Tightening Machine For M2 to M6 Screws